Framed Friday 9 - 4:30 $145 Diane Cook
Student Level: Beginning to Intermediate
Type of Workshop: Project
|
While shopping in Round Top, I found a group of vintage mother of pearl belt buckles. As I held them in my hand, what I most noticed was their unique shapes, and how fun it would be to use them as frames in my jewelry.
Come join me as I share the techniques used to design the pieces I call "Framed", which were published in the Winter 2011 issue of Belle Armoire Jewelry.
In this class you will learn how to cold join layers of nickel silver, copper or brass; then topping it with a vintage mother of pearl buckle. I will teach you a method of drilling through fragile mother of pearl. You will have the option to practice different types of texturing techniques, and how to apply enamel. You’ll have the option to fill your frame with a favorite picture and/or words, then seal it forever behind mica.
If time permits, the final design options for the necklace portion of "Framed", will be discussed.Kit Fee of $35 payable to Instructor at class time includes:
- Class Handout
- Vintage Mother of Pearl Buckle
- Brass Bouquet Filigree, 2 pieces of “Guenevere”(additional choices will be available for purchase in class)
- Attachments, 0-80 Bolts & Nuts, Heishi Washers, & Eyelets
- EZ Wrench Nut Driver
- Latex Free Gloves
- Face Mask
- Synthetic Steel Wool, “000”
- Sanding Pad, 320 grit
Instructor will provide the following for use in class:
- Mica
- Many Colors of Enamels
- Klyrfire, Novocan and Liver of Sulfur Patina
- Water bowls
- Quick-Fire Self-Igniting Propane Torch
- Soldering Stand
- Texturing Hammer
- Dremel Tool
- Copies of vintage pictures to put in your frame, but you might want to bring your own (1/2”hx3/4”w).
Students should bring:
- Nickel Silver Sheet Metal, 24 gauge, 1-3”x 3” piece
- Copper and Brass Sheet Metal, 24 gauge, 1 each -3”x 3” piece
- Metal Shears or Curved Shears ( www.beaducation.com or www.ameritool-inc.com)
- Dasco Pro Cold Chisel, 1/4” or 5/16” ( www.acehardware.com)
- Metal Jewelry Files, flat and half round
- Metal Hole Punch, 1.8mm ( www.beaducation.com)
- Flush Cutters
- Pliers, Chain-Nose, Flat-Nose & Round-Nose
- Tweezers
- Small Flexible Tape Measure
- Small Jewelry Scissors (Hobby Lobby)
- Glue, The Ultimate Glue or PVA Glue (Michael’s, Hobby Lobby or Art Supply)
- Flat Toothpicks or Small Craft Sticks
- 1/8” drill bit (sold individually Ace Hardware, Lowe’s or Home Depot)
- Steel Bench Block
- Bench Pad or Rubber Bench Block
- Ball Peen Hammer
- 5/32 or 1/8” Center Punch ( www.acehardware.com)
- Ultra Fine Point Marker, Black
- Metal Awl or Scribe ( www.acehardware.com)
- Small Picture to place inside of your frame (approx.1/2”hx3/4”w)
- Favorite Metal Design Stamps
Optional:
Safety Glasses (Lowe’s or Home Depot)
Resource Guide:
- www.brassbouquet.com
- www.ameritool-inc.com
- www.beaducation.com
- www.acehardware.com
- www.amazon.com
- www.riogrande.com
- www.metalliferous.com
Questions? Email Diane at rosajosies@yahoo.com
Website: www.rosajosies.com


